Enter each piece's dimensions and weight, including the pallet. You'll get cubic feet, density in pounds per cubic foot and the freight class on the current NMFC density scale.
Estimates for planning, not financial, tax or legal advice. Figures use US rules unless the page says otherwise.
How freight density and class are worked out
Cubic feet = length × width × height (inches) ÷ 1,728
Density = total weight (lb) ÷ total cubic feet
Measure each piece at its longest, widest and tallest points, including the pallet and any overhang. Then look the density up on the scale below.
| Density (lb per ft³) | Class | Density (lb per ft³) | Class |
| Less than 1 | 400 | 10 to less than 12 | 92.5 |
| 1 to less than 2 | 300 | 12 to less than 15 | 85 |
| 2 to less than 4 | 250 | 15 to less than 22.5 | 70 |
| 4 to less than 6 | 175 | 22.5 to less than 30 | 65 |
| 6 to less than 8 | 125 | 30 to less than 35 | 60 |
| 8 to less than 10 | 100 | 35 to less than 50 | 55 |
| | 50 or more | 50 |
What changed in 2025
The National Motor Freight Traffic Association's Docket 2025-1 took effect on July 19, 2025. It moved many commodities from a fixed, commodity-based class to density-based classes, and replaced the old 11-tier density scale with this 13-tier one. The old scale stopped at class 60 for anything 30 lb per ft³ or denser. The new scale splits that range into classes 60, 55 and 50, so very dense freight can rate lower than before. Carrier tools such as Estes's density calculator now use the 13-tier table.
Worked examples
- A 48 × 40 × 48 in pallet weighing 500 lb: 48 × 40 × 48 ÷ 1,728 = 53.33 ft³, and 500 ÷ 53.33 = 9.38 lb per ft³, which is class 100.
- A 40 × 48 × 30 in pallet weighing 2,000 lb: 33.33 ft³ and 60 lb per ft³, so class 50 (class 60 on the old scale).
- A 48 × 40 × 60 in pallet of light goods weighing 100 lb: 66.67 ft³ and 1.5 lb per ft³, so class 300.
Limits
- Density isn't the whole story. Some NMFC items aren't rated on this general scale, and handling, stowability and liability can matter. Your item's NMFC number decides which applies.
- Carriers may reweigh and remeasure shipments and bill the corrected class.
- The freight class sets the rate tier, not the price. For a quote, ask the carrier with the class, weight, origin and destination.
Sources
How we checked this
Before every update, this calculator is run in a real browser with these known answers, and it must match all of them:
- 48 × 40 × 48 in, 500 lb: 9.38 lb/ft³, class 100 ✓
- 40 × 48 × 30 in, 2,000 lb: 60 lb/ft³, class 50 ✓
- Same: class 60 on the old 11-tier scale ✓
- 48 × 40 × 60 in, 100 lb: 1.5 lb/ft³, class 300 ✓
- Exactly 15 lb/ft³ is class 70, not 85 ✓
- Metric: 120 × 100 × 120 cm, 300 kg: 13.01 lb/ft³, class 85 ✓
Last checked October 26, 2026. Spotted something wrong? The math is done in your browser with the formula shown on this page, so you can check any result by hand.
Questions people ask
How do I calculate freight class?
Find the density: multiply length × width × height in inches, divide by 1,728 for cubic feet, then divide the weight by the cubic feet. Look the pounds per cubic foot up on the NMFC density scale.
What freight class is 10 pounds per cubic foot?
10 to less than 12 lb per ft³ is class 92.5 on the 2025 scale. Just under 10 is class 100.
What changed with NMFC freight classes in 2025?
Docket 2025-1, effective July 19, 2025, moved many items to density-based classes and introduced a 13-tier density scale that adds classes 55 and 50 for freight denser than 35 lb per ft³.
Do I include the pallet in the weight and size?
Yes. Use the total weight and the outer dimensions of the shipment as it will travel, pallet included.
Is this a freight cost calculator?
It finds the class, which is one input to an LTL rate. The price also depends on the carrier, distance, weight, accessorials and any discount.