A throw distance calculator: enter the throw ratio and screen size to see where the projector goes, or the distance to see how big the picture will be.
How throw distance is calculated
A projector's throw ratio is the distance from the lens to the screen divided by the width of the picture. A 1.5 throw ratio needs 1.5 ft of distance for every foot of image width. Short-throw projectors have small ratios, often under 1.
Throw distance = throw ratio × image width
Image width = throw distance ÷ throw ratio
Throw ratio = throw distance ÷ image width
Image width = diagonal × W ÷ √(W² + H²) for a W:H aspect ratio
Worked example
A 100 in 16:9 screen is 100 × 16 ÷ √337 = 87.16 in wide. With a 1.5 throw ratio the lens goes 1.5 × 87.16 = 130.7 in from the screen: 10 ft 10.7 in. A zoom lens from 1.2 to 1.5 can sit anywhere from 104.6 in (8 ft 8.6 in) to 130.7 in.
The other way: 12 ft (144 in) away at a 1.2 throw ratio gives an image 144 ÷ 1.2 = 120 in wide, which is a 137.7 in diagonal at 16:9 (67.5 in tall).
Getting a realistic number
- Use the throw ratio from your projector's manual or spec sheet. Makers often give it as a range, like 1.13–1.47, for a zoom lens.
- Measure from the lens, not the back of the projector or the wall behind it.
- Lens shift and keystone correction move or reshape the picture, but they don't change the throw ratio. Digital keystone correction can soften the image.
- Some makers measure throw ratio against the image diagonal or give tables in their own units. If the answer looks far off, check the manual's distance table.
Sources
How we checked this
Before every update, this calculator is run in a real browser with these known answers, and it must match all of them:
- Throw ratio 1.5, 100 in 16:9 image: 1.5 × 87.16 in = 130.7 in (10 ft 10.7 in) ✓
- 12 ft away at throw ratio 1.2: 120 in wide, 137.7 in diagonal ✓
- 10 ft away filling a 90 in wide 16:9 image (103.3 in diagonal) is a 1.33 throw ratio ✓
- Zoom 1.2 to 1.5 for 100 in: 8 ft 8.6 in to 10 ft 10.7 in ✓
- Edge: a throw ratio of 0 is refused ✓
Last checked October 26, 2026. Spotted something wrong? The math is done in your browser with the formula shown on this page, so you can check any result by hand.
Questions people ask
How far should a projector be from a 100 inch screen?
Multiply the throw ratio by the screen width, 87.2 in for a 100 in 16:9 screen. A 1.5 throw ratio needs about 130.7 in (10.9 ft); a 1.2 ratio needs about 104.6 in (8.7 ft).
What is throw ratio?
Throw distance divided by image width. A ratio of 2.0 means the projector sits 2 ft back for every 1 ft of picture width.
How big will my image be?
Divide the distance by the throw ratio for the width, then use the aspect ratio for the diagonal. 12 ft at 1.2 gives 10 ft (120 in) wide, a 137.7 in 16:9 picture.
What is a short-throw projector?
One with a small throw ratio, so it makes a big picture from close up. Ultra-short-throw models sit just inches from the wall.
Does it matter if I use 4:3 instead of 16:9?
Yes. The same diagonal is narrower at 4:3 (0.8 × diagonal vs 0.872), so the projector sits a little closer.