Turn resistor color bands into ohms, find the color code for any value, and work out resistors in series or parallel.
Resistor color code chart (IEC 60062)
| Color | Digit | Multiplier | Tolerance | Temp. coeff. (ppm/K) |
|---|
| Black | 0 | ×1 | — | 250 |
| Brown | 1 | ×10 | ±1% | 100 |
| Red | 2 | ×100 | ±2% | 50 |
| Orange | 3 | ×1k | ±0.05% | 15 |
| Yellow | 4 | ×10k | ±0.02% | 25 |
| Green | 5 | ×100k | ±0.5% | 20 |
| Blue | 6 | ×1M | ±0.25% | 10 |
| Violet | 7 | ×10M | ±0.1% | 5 |
| Grey | 8 | ×100M | ±0.01% | 1 |
| White | 9 | ×1G | — | — |
| Gold | — | ×0.1 | ±5% | — |
| Silver | — | ×0.01 | ±10% | — |
| Pink | — | ×0.001 | — | — |
| No band | — | — | ±20% | — |
Older charts list grey tolerance as ±0.05%. The values above follow IEC 60062:2016.
How to read the bands
- 4 bands: digit, digit, multiplier, tolerance.
- 5 bands: digit, digit, digit, multiplier, tolerance. Used for precision resistors.
- 6 bands: the 5-band code plus a temperature coefficient band, in parts per million per kelvin.
- Start from the end with the band closest to the edge. The tolerance band is usually set apart and wider. Gold or silver is never a first band.
Resistance = (digits) × multiplier · range = resistance × (1 ± tolerance)
Series: R = R1 + R2 + … + Rn
Parallel: 1/R = 1/R1 + 1/R2 + … + 1/Rn
Worked examples
Yellow, violet, red, gold: digits 4 and 7 give 47, the red multiplier is ×100, so 47 × 100 = 4,700 Ω (4.7 kΩ) ±5%, anywhere from 4,465 to 4,935 Ω.
Brown, black, black, red, brown (5 bands): 100 × 100 = 10 kΩ ±1%. Add a brown sixth band and it's rated 100 ppm/K.
100 Ω, 220 Ω and 470 Ω in series add to 790 Ω. In parallel: 1/100 + 1/220 + 1/470 = 0.016673, and 1 ÷ 0.016673 = 59.98 Ω, less than the smallest one.
Limitations
- Colors fade with heat and age, and red, orange and brown can look alike under some lights. Check with a multimeter when it matters.
- Some resistors, like surface-mount parts, use number codes instead of colors.
- Series and parallel results use the nominal values; real totals vary within each part's tolerance.
Sources
How we checked this
Before every update, this calculator is run in a real browser with these known answers, and it must match all of them:
- Yellow, violet, red, gold = 4.7 kΩ ±5% (4.465 to 4.935 kΩ) ✓
- Brown, black, black, red, brown (5 bands) = 10 kΩ ±1% ✓
- 6 bands with a brown tempco band: 100 ppm/K ✓
- 4.7 kΩ ±5% is yellow, violet, red, gold ✓
- Edge: 4.7 Ω uses a gold multiplier: yellow, violet, gold, gold ✓
- Edge: 4.75 kΩ can't be shown with 2 digits ✓
- 100, 220 and 470 Ω: 790 Ω in series, 59.9768 Ω in parallel ✓
- Edge: one resistance asks for at least two ✓
Last checked October 26, 2026. Spotted something wrong? The math is done in your browser with the formula shown on this page, so you can check any result by hand.
Questions people ask
How do I read a resistor color code?
Read the digit bands, then multiply by the multiplier band. On a 4-band resistor, brown, black, orange, gold is 10 × 1,000 = 10 kΩ ±5%.
What are the colors for a 10k resistor?
Brown, black, orange for 4 bands (10 × 1,000), plus a tolerance band such as gold. On 5 bands it's brown, black, black, red (100 × 100).
How do I calculate resistors in series and parallel?
In series, add the values. In parallel, add the reciprocals and take the reciprocal of the sum. Two equal resistors in parallel give half of one: 1 kΩ and 1 kΩ make 500 Ω.
What does the gold band mean?
As the last band, gold means ±5% tolerance. As the multiplier band, gold means ×0.1, so yellow, violet, gold is 4.7 Ω.
Which way do I read a resistor?
Start from the end where the bands are closest to the edge. The tolerance band is often wider or set apart from the others, and gold or silver can't be a first digit.