Calcist

Style

Buttons

Spacing

How much to show

Decimal places

Text size

Spray foam calculator

Enter the area and how thick you'll spray, pick open- or closed-cell foam, and get the board feet, the number of kits and the R-value.

Private: calculated on your device. Nothing you type is sent anywhere.

Next: Using batts or blown-in instead? Compare with the insulation calculator.

What is a board foot of spray foam?

Spray foam is sold by the board foot: 1 square foot covered 1 inch thick (144 cubic inches). A kit rated at 600 board feet covers 600 sq ft at 1 in, 300 sq ft at 2 in or 200 sq ft at 3 in. Touch 'n Seal, for example, sells FK-200 and FK-600 kits rated at 200 and 600 board feet.

Board feet = area (sq ft) × thickness (in)
With waste = board feet × (1 + waste %)
Kits = board feet with waste ÷ kit size, rounded up
R-value = thickness × R per inch

Worked example

400 sq ft of basement wall at 3 in of closed-cell foam: 400 × 3 = 1,200 board feet. With 10% for overspray and waste: 1,320 board feet ÷ 600 = 2.2, so 3 kits. At R-5.5 to R-6.5 per inch, 3 in gives about R-16.5 to R-19.5.

Open-cell vs closed-cell

Open-cellClosed-cell
R-value per inchabout R-3.6R-5.5 to R-6.5
3 in givesabout R-10.8R-16.5 to R-19.5

Closed-cell foam is denser and has the higher R-value per inch; open-cell is lighter and cheaper per board foot. R-values per inch from the U.S. Department of Energy's insulation materials guide. A product's label or data sheet gives its tested R-value, which is the one to use.

Getting a realistic number

  • Kit ratings are ideal yields. Cold surfaces, cold kits, overspray and uneven thickness all cut the real yield, so allow extra.
  • Stud walls: subtract the studs if you're only spraying the cavities, or simply use the cavity area.
  • Safety: spray foam chemicals need ventilation and protective gear while spraying; follow the kit maker's instructions and local code on covering foam with a fire barrier.

Sources

How we checked this

Before every update, this calculator is run in a real browser with these known answers, and it must match all of them:

  • 400 sq ft at 3 in: 1,200 board feet ✓
  • Same with 10%: 1,320 ÷ 600 → 3 kits ✓
  • 3 in closed-cell: R-16.5 to R-19.5 ✓
  • 3.5 in open-cell: R-12.6 ✓
  • Edge: a thickness of 0 asks for one ✓

Last checked October 26, 2026. Spotted something wrong? The math is done in your browser with the formula shown on this page, so you can check any result by hand.

Add this calculator to your website (free)

Paste this code into any web page. The calculator works on your page, resizes itself, has no ads and no tracking cookies, and nothing your visitors type is sent anywhere. More about embedding.

Questions people ask

How many board feet is a 600 board foot kit?

600 sq ft at 1 in thick, 300 sq ft at 2 in or 200 sq ft at 3 in, in ideal conditions.

How do I calculate board feet of spray foam?

Multiply the area in square feet by the thickness in inches. 400 sq ft at 2 in is 800 board feet.

What R-value is 2 inches of closed-cell spray foam?

About R-11 to R-13, at R-5.5 to R-6.5 per inch.

What R-value is open-cell spray foam?

About R-3.6 per inch, so 3.5 in in a 2×4 wall gives about R-12.6.

How many kits do I need for a rim joist?

Measure the rim joist's height and total length for its area, multiply by the thickness, and divide by the kit's board feet. Rim joists are a common use for 200 board foot kits.

Related calculators