Calcist

Style

Buttons

Spacing

How much to show

Decimal places

Text size

Army body fat calculator

Enter your height and waist to check the Army's current body composition standard, a waist-to-height ratio below 0.55. Add weight and age to see the old one-site tape estimate too.

The Army standard needs only these two numbers. Age and weight are used for the old (rescinded) one-site estimate below.

General estimate, not medical advice. Only the measurement taken by your unit's trained team counts for the Army.

Private: calculated on your device. Nothing you type is sent anywhere.

Next: Want a general body fat estimate instead? Use the body fat calculator. The waist-to-height ratio calculator shows the general health boundary of 0.5.

The current Army standard: waist-to-height ratio

Army Directive 2026-13, announced July 7, 2026, replaced the height and weight tables, the circumference-based tape test and the supplemental body fat scans with one measurement: the waist-to-height ratio (WHtR). The waist is measured at the navel (belly button) and divided by height, both in inches.

WHtR = waist at the navel (in) ÷ height (in)
Meets the standard: WHtR below 0.55 · Flagged: WHtR of 0.55 or more
Largest passing waist: under 0.55 × height

If the first reading is 0.55 or more, a different team takes a confirmation measurement on the same duty day. A Soldier who is still at 0.55 or above is flagged and enrolled in the Army Body Composition Program (ABCP). All Soldiers are measured at least twice a calendar year, and no Army Fitness Test (AFT) score exempts anyone from the standard. The directive also says no secondary or supplemental body composition method, including the tape test, may be used to challenge a WHtR result.

Worked example

A Soldier who is 70 inches tall with a 34-inch waist has a ratio of 34 ÷ 70 = 0.486, which is below 0.55, so it meets the standard. The largest waist that passes at 70 inches is just under 0.55 × 70 = 38.5 inches. A 38.5-inch waist gives exactly 0.55, which does not meet it.

At 65 inches, the limit is 0.55 × 65 = 35.75 inches, so a 32-inch waist (32 ÷ 65 = 0.492) passes.

The old one-site tape test (June 2023 to July 2026)

From June 2023 until the 2026 change, Army Directive 2023-11 used a single tape measurement around the abdomen, plus body weight, to estimate body fat. It is no longer used for the standard, but it's shown in the result for comparison because many people still search for it:

Men: % body fat = −26.97 − (0.12 × weight in lb) + (1.99 × abdomen in inches)
Women: % body fat = −9.15 − (0.015 × weight in lb) + (1.27 × abdomen in inches)

For the man above at 180 lb: −26.97 − (0.12 × 180) + (1.99 × 34) = −26.97 − 21.6 + 67.66 = 19.09%. A 30-year-old woman at 150 lb with a 32-inch abdomen: −9.15 − 2.25 + 40.64 = 29.24%.

Those estimates were compared with the maximum body fat in AR 600-9 (2019), Table B-2:

AgeMen (old limit)Women (old limit)
17–2020%30%
21–2722%32%
28–3924%34%
40 and older26%36%

Before June 2023, the Army tape test measured the neck and waist for men, and the neck, waist and hips for women. That older method is also no longer used.

Getting a realistic number

  • Measure the waist at the navel with the tape level all the way around, snug but not pressing into the skin, after breathing out normally.
  • Stand straight against a wall to measure height. Being off by half an inch on the waist changes the ratio by about 0.007 at 70 inches tall.
  • We couldn't find a published rounding rule for the measurements, so a reading right at the line is best checked by your unit.
  • The general health boundary for waist-to-height ratio is lower, 0.5. See the waist-to-height ratio calculator.

Sources

How we checked this

Before every update, this calculator is run in a real browser with these known answers, and it must match all of them:

  • 70 in tall, 34 in waist: WHtR 0.486, meets the standard ✓
  • Old one-site estimate, man, 180 lb, 34 in: 19.1% body fat ✓
  • Old one-site estimate, woman, 150 lb, 32 in: 29.2%, old limit 34% at 30 ✓
  • Edge: 38.5 in waist at 70 in is exactly 0.55, which does not meet it ✓
  • Largest waist under the standard at 65 in: under 35.75 in ✓
  • Edge: a height of 0 is rejected ✓

Last checked October 26, 2026. Spotted something wrong? The math is done in your browser with the formula shown on this page, so you can check any result by hand.

Add this calculator to your website (free)

Paste this code into any web page. The calculator works on your page, resizes itself, has no ads and no tracking cookies, and nothing your visitors type is sent anywhere. More about embedding.

Questions people ask

What is the Army body fat standard in 2026?

Since July 2026 the Army uses a waist-to-height ratio instead of a body fat percentage. Your waist at the navel divided by your height must be below 0.55. At 5 ft 10 in (70 inches) that means a waist under 38.5 inches.

Is the Army tape test gone?

Yes. Army Directive 2026-13 replaced the height and weight tables, the circumference-based tape test and the supplemental body fat assessments with the waist-to-height ratio.

Does a high AFT score exempt me?

No. The directive says no AFT score exempts a Soldier from the waist-to-height standard. The earlier exemption for 465 or more on the AFT was rescinded.

What was the one-site tape test formula?

For men: −26.97 − 0.12 × weight (lb) + 1.99 × abdomen (in). For women: −9.15 − 0.015 × weight (lb) + 1.27 × abdomen (in). It was used from June 2023 until the July 2026 change.

What happens if I measure 0.55 or more?

Another team measures again on the same duty day. If it's still 0.55 or more, you are flagged and enrolled in the Army Body Composition Program until you meet the standard.

Related calculators