How pool volume is calculated
Find the surface area of the shape, multiply by the average depth to get cubic feet, then convert to gallons. A cubic foot holds 7.48052 US gallons (1 ft³ = 0.0283168 m³ and 1 gallon = 0.00378541 m³, from NIST).
Rectangle: area = length × width
Round: area = π × (diameter ÷ 2)²
Oval (ellipse): area = π × length × width ÷ 4
Oblong (straight sides, round ends): area = (length − width) × width + π × width² ÷ 4
Kidney: area ≈ 0.45 × (A + B) × length
Gallons = area × average depth × 7.48052; liters = gallons × 3.78541
Pool guides often round 7.48 up to 7.5 for rectangles and use 5.9 (that's 7.5 × π ÷ 4) for round and oval pools. This calculator uses π and 7.48052 directly, so its answers are slightly lower and a little more exact. The kidney formula is an approximation from Leslie's pool guide; A and B are the widths at the two widest points.
Worked example
A 32 × 16 ft rectangular pool, 3.5 ft at the shallow end and 8 ft at the deep end. Average depth = (3.5 + 8) ÷ 2 = 5.75 ft. Volume = 32 × 16 × 5.75 = 2,944 cubic feet. × 7.48052 = 22,023 gallons, or about 83,365 liters.
A 24 ft round above-ground pool filled to 4 ft: π × 12² × 4 = 1,809.6 cubic feet × 7.48052 = 13,536 gallons.
Getting a realistic number
- Measure the water, not the wall. Use the depth of the water, which is usually several inches below the top of the wall or coping.
- Sloped bottoms. Averaging the two ends works for a steady slope. A pool with a long flat shallow area and a short deep hopper holds less than the average suggests; split it into sections and add them.
- Free-form pools. Split the pool into rectangles and circles and add their volumes, or use the kidney estimate.
- Check with a meter. The most accurate figure comes from a water meter reading before and after filling. Dosing from a volume that's 20% off makes every chemical dose 20% off.