Calcist

Style

Buttons

Spacing

How much to show

Decimal places

Text size

Pool salt calculator

Enter your pool's gallons, today's salt reading and the target from your chlorinator's manual to get the pounds of salt and the number of bags.

Private: calculated on your device. Nothing you type is sent anywhere.

Next: Not sure of the gallons? Find them with the pool volume calculator. Topping up chlorine by hand? Use the pool chlorine calculator.

How much salt to add

Salt level is measured in parts per million (ppm) by weight. A gallon of water weighs about 8.34 lb (USGS), so a pool's water weight is its gallons × 8.34. To raise the level by some number of ppm, add that many millionths of the water's weight in salt.

Pounds of salt = gallons × 8.34 × (target ppm − current ppm) ÷ 1,000,000
Bags = pounds ÷ bag size, rounded up

Worked example

A new 20,000 gallon pool with no salt, aiming for 3,200 ppm: 20,000 × 8.34 × 3,200 ÷ 1,000,000 = 533.8 lb. That's 533.76 ÷ 40 = 13.3, so 14 bags of 40 lb salt.

The same pool reading 2,400 ppm needs 20,000 × 8.34 × 800 ÷ 1,000,000 = 133.4 lb, or 4 bags.

What salt level should I aim for?

Use the number in your chlorine generator's manual. Hayward, for example, says its Aqua Rite works best at about 3,200 ppm and will run anywhere from 2,700 to 3,400 ppm. Most residential salt systems ask for something between about 2,700 and 3,600 ppm. Too little salt and the cell makes less chlorine and may shut off; too much can trigger a high-salt warning and taste salty.

Tips

  • Add a little less, then retest. Pool volumes are often estimates. Add about two-thirds of the amount, let it dissolve and circulate for 24 hours, then test again and top up.
  • Use the right salt. Use pure sodium chloride sold for pools (99% or more), not rock salt or salt with anti-caking additives.
  • Salt doesn't evaporate. It only leaves with splash-out, backwashing, draining and rain overflow, so you top up occasionally, not weekly.
  • Too much salt? The only fix is to drain some water and refill with fresh water. To bring 4,000 ppm down to 3,200, replace about 1 − 3,200 ÷ 4,000 = 20% of the water.

Sources

How we checked this

Before every update, this calculator is run in a real browser with these known answers, and it must match all of them:

  • 20,000 gal from 0 to 3,200 ppm: 533.8 lb ✓
  • Same: 14 bags of 40 lb ✓
  • 20,000 gal from 2,400 to 3,200 ppm: 133.4 lb ✓
  • Edge: 4,000 ppm with a 3,200 target: replace about 20% of the water ✓
  • Edge: no volume asks for one ✓

Last checked October 26, 2026. Spotted something wrong? The math is done in your browser with the formula shown on this page, so you can check any result by hand.

Add this calculator to your website (free)

Paste this code into any web page. The calculator works on your page, resizes itself, has no ads and no tracking cookies, and nothing your visitors type is sent anywhere. More about embedding.

Questions people ask

How much salt do I need for a 10,000 gallon pool?

From zero to 3,200 ppm, 10,000 × 8.34 × 3,200 ÷ 1,000,000 = 267 lb, or 7 bags of 40 lb.

How many bags of salt for a 15,000 gallon pool?

From zero to 3,200 ppm, 15,000 × 8.34 × 3,200 ÷ 1,000,000 = 400.3 lb, which rounds up to 11 bags of 40 lb. Ten bags (400 lb) would reach about 3,197 ppm, which is close enough for most systems.

How much does 40 lb of salt raise the ppm?

In 20,000 gallons, 40 lb raises the salt level by 40 × 1,000,000 ÷ (20,000 × 8.34) = about 240 ppm. In 10,000 gallons it's about 480 ppm.

How long does pool salt take to dissolve?

Usually a day with the pump running. Brush salt off the floor to speed it up, and wait about 24 hours before retesting or turning the cell back on, as your manual directs.

Can I swim right after adding salt?

Usually yes once it has dissolved, but follow your chlorinator maker's instructions, which often say to keep the cell off until the salt has fully mixed.

Related calculators