How softener size is worked out
A softener's size is its grain capacity: how many grains of hardness it can remove before it has to regenerate (recharge with salt). So the job is to find how many grains you use a day and multiply by the days you want between regenerations.
Compensated hardness = hardness + iron (ppm) × iron factor
Grains per day = people × gallons per person per day × compensated hardness
Capacity needed = grains per day × days between regenerations
Penn State Extension notes that a grain per gallon equals about 17 mg/L, and works the same example: 75 gallons × 10 gpg × 4 people = 3,000 grains a day, so a 20,000 grain softener regenerates about every 6 to 7 days. The 75 gallons per person per day in that example is a common planning figure; your water bill gives your real use.
Worked example
A family of 4, using 75 gallons each a day, with 10 gpg hardness: 4 × 75 × 10 = 3,000 grains a day. For 7 days between regenerations: 3,000 × 7 = 21,000 grains, so choose a softener that delivers at least that much between regenerations. With 1 ppm of iron at 5 gpg per ppm, the hardness counts as 15 gpg: 4,500 grains a day and 31,500 grains for a week.
About iron
Softener sellers commonly add about 5 gpg to the hardness for each ppm of iron when sizing (one seller's guide uses this rule); the factor is editable here. Penn State cautions that a softener only removes dissolved (clear-water) iron: iron that has oxidized, from air or chlorine, clogs the resin and needs a filter first.
Getting a realistic number
- Rated capacity isn't all usable. Softeners are often set to regenerate with salt-efficient settings that give less than the maximum rated grains; check the maker's chart.
- Outdoor water for lawns and pools usually isn't softened, so leave it out of gallons per day.
- Test your water. A hardness test kit or lab test gives the gpg and iron.